Images are representations only.
Horizontal (PUMA)
Brand: Tremco IncorporatedTREMproof® PUMA is a cold-applied, waterproofing system that utilizes polyurethane-methacrylate (PUMA) technology. PUMA waterproofing systems offer superior elongation over traditional MMA/PMMA technology systems. TREMproof PUMA is composed of a primer (Tremco PUMA Primer) and a base coat (Tremco PUMA BC or Tremco PUMA BC LM). All system components are cured using Tremco PUMA Initiator.
Features- PUMA technology delivers extreme durability while maintaining its crack-bridging characteristics, eliminating the need for reinforcing fabric
- 30 to 45-minute cure time between coats; ability to proceed to overburden 1 hour after application
- Can be applied at temperatures as low as 14 °F (-10 °C), which allows for continuation of projects in the colder months
- Zero Volatile Organic Compounds (VOCs)
- Compatible with Tremco sealants, coatings and expansion joints, which is essential for tie-ins, detailing and penetrations.
Specifications
Brand
VOC Content (Method 310)
- 0 g/L
% Solids (By Weight) (ASTM D1353)
- 100%
Drying Time @ 75°F, 50% RH (ASTM D1640)
- 80 mil film, 1 hr
Weathering (ASTM D822) Weatherometer (350 hr)
- N/A
Elongation (ASTM D638)
- 407-420%
Elongation (ASTM D5147)
- Min 30%
Tensile Strength (ASTM D638 @ 75°F)
- 991-1680 PSI
Tearing Resistance (ASTM D4073)
- 91 lbf
Hardness, Shore D (ASTM D2240)
- 18-35
Hardness, Shore A (ASTM D2240)
- 65-87
Abrasion Resistance (1000 Cycles) (ASTM D4060)
- N/A
Low-Temperature Crack Bridging (ASTM C1305)
- Passes
Taber Abrasion (ASTM C501)
- Passes
Peak Load @ 73°F, AVG (ASTM D5147)
- >70 lbf/in
Puncture Resistance (ASTM D5602)
- >56 lbs
Water Absorption (ASTM D570)
- <0.1%
Water Vapor Transmission (ASTM E96)
- 0.03 perms
Adhesion-In-Peel (ASTM C794)
- Concrete Failure with Primer
Self-Ignition Temperature (ASTM D1929)
- 800°F (427°C)
Smoke Density (ASTM D2843)
- 4.1%
Rate of Burn (ASTM D635)
- 1.2 in/min